Configuring Your Gateway
97
SMCD3GN2 Wireless Cable Modem User Manual
Configuring DMZ Settings
If you have a local client computer that cannot run an Internet application properly behind
the NAT firewall, you can configure it for unrestricted two-way Internet access by defining it
as a Virtual Demilitarized Zone (DMZ) host. Adding a client to the DMZ may expose your
local network to various security risks because the client in the DMZ is not protected by the
firewall.
To access the DMZ (Demilitarized Zone) menu, click
Firewall
in the menu bar and then click
the
DMZ
submenu in the menu bar. Figure 53 shows an example of the menu.
Note:
The
DMZ
submenu is not available in the menu bar if
Enable Firewall Module
is
disabled in the Security Settings (Firewall) menu (see page 73).
Figure 53. DMZ (Demilitarized Zone) Menu
To configure DMZ settings:
1. In the DMZ (Demilitarized Zone) menu, check
Enable DMZ Host
. The 2 rightmost fields
next to this option become available.
2. Enter the last two octets in the IP addresses of the computer to be used as the DMZ
server.
3. Click
Apply
.