Configuring Your Gateway
84
SMCD3GN2 Wireless Cable Modem User Manual
Adding Customer-Defined Filters
Using the following procedure, you can add customer-defined filters that block certain types
of traffic from the LAN side of the Gateway to the Internet side of the Gateway.
1. In the Access Control menu, check
Enable Access Control
if it is not checked and click
the
Apply
button. The remaining fields in the menu become available.
2. Under
Customer Defined Filtering Table
, click the
Add
button. The Customer Defined
Filter menu appears (see Figure 46).
3. Complete the fields in the Customer Defined Filter menu (see Table 21).
4. Click
Apply
. (Or click
Back
to return to the Access Control menu or
Cancel
to cancel any
selections you made.) If you clicked
Apply
, the customer-defined filter is added to the
Customer Defined Filtering Table
.
5. To define additional filters for access control (up to 35, including predefined filters), repeat
steps 2 through 4. When you finish, click
Apply
in the Access Control menu to save your
settings.
6. To change the settings for a customer-defined filter, click the radio button to the left of the
filter you want to change and click the
Edit
button. When the Customer Defined Filter
menu appears, edit the settings as necessary (see Table 21) and click
Apply
. Click
Apply
in the Access Control menu to save your settings.
7. To delete a customer-defined filter, click the radio button to the left of the filter you want to
delete and click the
Delete
button. No precautionary message appears before you delete a
customer-defined filter. Click
Apply
in the Access Control menu to save your settings.