SMCBR14
Cable/DSL Router User Guide
60
accessing your router from the Internet. The default IP address is 0.0.0.0. It means
this function is disabled. To enable this function, change the default IP address to
another IP address as desired.
)
Note:
1) To access the router, you will type your router's WAN IP address into your
browser's address (in IE) or Location (in Navigator) box, followed by a colon and
the custom port number. For example, if your Router's WAN address is
202.96.12.8, and the port number you use is 8080, please enter
http://202.96.12.8:8080
in your browser. Later, you may be asked for the router's
password. After successfully entering the username and password, you will be
able to access the router's web-based utility.
2) Be sure to change the router's default password to a very secure password
.
4.11.9 Statistics
Choose menu “
System Tools
→
Statistics
”, you can view the statistics of the Router.
This screen (shown in Figure 4-58) displays the network traffic of each PC on LAN,
including total traffic and current traffic of the last “Packets Statistic interval” seconds.
Figure 4-58
¾
Current Statistics Status -
Enable or Disable the statistics function. The default
status is disabled. Click the
Enable
button to use the function. Click the
Disable
button to disable the function.
¾
Packets Statistics Interval -
The default value is 10. Select a value between 5 and
60 seconds in the pull-down list. The Packets Statistic interval value indicates the
time section of the packets statistic.
¾
Sorted Rules -
Select the rule for displaying the traffic information.
