SMC Networks PF3A801H-L Operation Manual Download Page 96

Page: 96 / 104

-95-

No.PF

※※

-OMY0005

Error name

Error display

Description

Measures

Accumulated flow
error

The accumulated value has
exceeded the accumulated flow
range.
(For accumulated increment)

Reset the accumulated flow.
(Press the DOWN and SET buttons
simultaneously for 1 second or longer)

The accumulated value has reached
the set accumulated value.
(For accumulated decrement)

Zero clear error

A pressure of 7%F.S. or more is
applied during the zero clear
operation.
(Return to measurement mode in
one second)

Select the suitable IO-Link version for
the device.

Version does not
match

Version of master and IO-Link
does not match.

Align the master IO-Link version to the
device.



: If the error cannot be reset after the above measures are taken, or errors other than above are displayed, please contact SMC.

Summary of Contents for PF3A801H-L









































































































Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands

SMC Networks PF3A801H-L, Operation Manual

Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands