SMC Networks PF3A801H-L Operation Manual Download Page 68

Page: 68 / 104

-67-

No.PF

※※

-OMY0005

PD Flow rate check

Press the UP or DOWN button to select
the flow rate check.



: This function is available with IO-Link communication.

Press the SET button to set.

Move on to PD Temperature check.

PD Temperature check

Press the UP or DOWN button to select
the temperature check.



: This function is available with IO-Link communication.

Press the SET button to set.

Move on to PD Pressure check.

PD Pressure check

Press the UP or DOWN button to select
the pressure check.



: This function is available with IO-Link communication.

Press the SET button to set.

Return to function selection mode.

[F98] Setting of output check completed



: Measurement mode can return from any setting item by pressing the SET button for 2 seconds or longer.



: An increase or decrease in flow rate, temperature or pressure will have no effect on the output while the output operation is being

performed.



: PD stands for Process data. Refer to page 74 for further details.

Summary of Contents for PF3A801H-L









































































































Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands

SMC Networks PF3A801H-L, Operation Manual

Search results

Summary of Contents for PF3A801H-L

Reviews:

Related manuals for PF3A801H-L

Brands by name

Popular brands