![background image](http://html1.mh-extra.com/html/smc-networks/mxz12-series/mxz12-series_operation-manual_1299840009.webp)
- 9 -
3)
Place a bracket so that it contacts the machined corner of the surface for mounting or insert a pin
into the through hole on the side to prevent sliding.
(5) Others Caution
Warning
1)
Do not place your hands or fingers between the table and the bracket.
Hands or fingers could get caught between the table and the bracket when the piston rod retracts. If
hands or fingers are caught, it can lead to injury.
Caution
1) Do not disassemble and modify the product.
2) If the cylinder is stopped at an intermediate position by external stopper, position of the steel balls
that make up the liner guide may become displaced.
When the intermediate stop is released while the steel ball position is displaced, the cylinder may
not be able to achieve a full stroke with minimum operating pressure.
In this case, increase the supply pressure once up to the full stroke, then use the cylinder with the
specified pressure.