![background image](http://html1.mh-extra.com/html/smc-networks/mxz12-series/mxz12-series_operation-manual_1299840008.webp)
- 8 -
2.
For Pressing (Clamping)
Caution
Pressing work should be performed in line with the center of the guide.
If there is an offset in the L2 direction, an eccentric load will be applied to the guide. In this case,
pressing operations should not be performed.
3.
For Stopper
Caution
1) If a load is applied in the direction as shown on the right side, an eccentric load will be applied to
the guide. In this case, the product should not be used as a stopper.
2)
The transferred object should be stopped in line with the center of the guide.
If there is an offset in the L2 direction, an eccentric load will be applied to the guide. In this case, this
product should not be used as a stopper.