![background image](http://html1.mh-extra.com/html/smc-networks/msua1/msua1_operation-manual_1299838036.webp)
How to change the auto switch detecting position
When setting the detection position, loosen the cross recessed round head screw a bit and move the auto
switch to the preferred position and then tighten again and fix it. At this time, if tightened too much, screw
can become damaged and unable to fix position. Proper tightening torque: 0.4 to 0.6
[
N
・
m
]
When tightening the cross recessed round head screw, take care that the auto switch does not tilt.
Auto switch operating angle and hysteresis angle
- 35 -
Model
Operation angle
Hysteresis angle
MDSUA1,3
110
o
10
o
MDSUA7,20
90
o
Cross recessed
round head screw
Cross recessed
round head screw
Fig.10
Table.13
2020-10-13 11:15
DI987004