PARTS LIST
ATTENTION: Before you begin to assemble the
product, please make sure that all the parts are
included in the package and in good condition.
ASSEMBLY INSTRUCTIONS
CHAIR STYLE RTA-2024
Insert the casters (F) in the legs of the
base (C) using pressure, then place the
gas lift (E) in the middle of the base and
cover it with (H) as shown.
Flip over the seat (B) with its front
towards you and using screws (I)
assemble the mechanism (D) with its
knob facing to the front as shown.
Lift the fabric cover on the exterior side
of the armrests (G), and using screws (J)
and washers (K), assemble them on their
respective sides to the seat (B), BUT
LEAVE THE SCREWS LOOSE.
DO NOT ZIP UP YET.
Unzip the fabric cover on both armrests
(G) to have the exterior holes accessible
for the next step.
Place the top parts over the base parts
making sure the tip of the gas lift enters
into the hole of the mechanism.
Before seating and using the chair for
the first time, make sure that all
screws are properly tightened.
When you seat on the chair, not looking at it.
5-Star base
Backrest
Armrests
Hydraulic
Gas Lift
Covers for
Gas Lift (Set)
Casters
F
x5
Seat
M6x20mm
M8x35mm
Washers
22x 8x2mm
(Mechanism)
(Armrests)
E
x1
H
x1
G
D
x1
C
x1
A
x1
B
x1
I
x4
J
x8
K
x8
L
x1
(Armrests)
ATTENTION:
• Follow the instructions step by step.
• To avoid misalignments, leave the screws loose and do not tighten them until all are in their respective places.
• Do not overtighten or force the screws as they could break, strip, or damage the threads of the holes.
• Using the wrong size of screws on a part could result in damage to the screw or the part
1
2
3
4
5
6
Mechanism
x1 Right
x1 Left
5mm Allen Wrench
C
H
E
F
B
I
D
G
(Right)
G
(Left)
J K
Holes on the
exterior side
of the armrest
B
Using screws (J) and washers (K),
assemble the backrest (A) to both
armrests as shown. You can now tighten
the screws and zip up the covers.
A
J K
ASSEMBLY TIP: SCREW ON THE TOP
HOLE FIRST.
IDA-2024
