1826 N 106
th
E Ave • Tulsa, Oklahoma 74116
Office 918-794-1719 • Fax 918-794-1729 • www.Aztec-Ind.com
Installation Instructions
Aztec Vanity Tops
Before Beginning:
Aztec Vanity Tops are constructed from engineered marble. Although engineered marble is very resilient, please
use extra care during installation to avoid chips or cracks due to rough handling or dropped tools.
1
Remove vanity top from carton and test fit onto
cabinet. Ensure there is ample room for fittings,
water supply and drain connections. In corner
applications, the wall is often not square. In this case,
mark for square and make any necessary cuts with a
circular saw and masonry blade.
2
Install 4” center set lavatory faucet (sold separately).
3
Carefully place vanity top onto cabinet and adjust to
proper placement. Secure water supply lines
and test for leaks.
4
Apply small bead of paintable caulking between integral backsplash and wall. If applicable, install side splash (sold
separately). See reverse for side splash installation instructions.
