1. Do not use organic solvent to wipe the area of the name plate that shows the model.
It will erase what is indicated on the name plate.
2. Do not hit the rotating table by securing the body or hit the body by securing the rotating
table.
These actions could cause the table to bend or damage the bearing.
3. Do not place your foot directly on the table or on the equipment that is coupled to the table.
Placing
one’s weight directly onto the rotating table could cause the rotating table or the bearing to
become damaged.
4. If a product is equipped with an angle adjustment function, use it within the specified
adjustment range.
If the product is used outside the specified adjustment range, it could lead to equipment malfunction or
product damage. Refer to the product specifications for details on the adjustment range of the products.
5.
A product with an angle adjustment screw is temporarily secured at an arbitrary position within
the adjustable rotating range. Before using product, readjust it to a desired angle and tighten the
screw firmly.
Piping
1. Refer to the Fittings and Tubing Precautions (Best Pneumatics No.7) for handling one touch
fittings.
2. Preparation before piping
Before piping is connected, it should be thoroughly blown out with air (flushing) or washed to remove
chips, cutting oil and other debris from inside the pipe.
3. Wrapping of pipe tape
When screwing piping or fittings into ports, ensure that chips from the pipe threads or sealing material
do not enter the piping. Also, if tape is used, leave 1.5 to 2 thread ridges exposed at the end of the
threads.
Speed Adjustment
1. To make a speed adjustment, gradually adjust starting from the low speed end.
If the speed adjustment is performed from the high speed end, it could damage the product.
As a result, it could pose a hazard to humans and damage the machinery and equipment.
- 8 -
Caution
Caution
Warning
Sealant tape
Winding
Expose approx. 2 threads
direction
2020-10-13 10:38
DI987004
