Rotation direction and rotation angle
・
When the cylinder is pressurized from port B, the table rotates clockwise.
・
To obtain the desired rotation angle, the rotation ends can be set within the range shown in the diagram
by regulating the adjustment bolt.
２
Note)
・
The drawing shows the rotation range of the positioning pin hole.
・
The pin hole position in the drawing shows anticlockwise rotation end when the rotation angle is set at
180°
by equally tightening the adjusting bolts A and B.
・
Refer to the setting example of the rotation angle range.
Table 7 shows adjusting angle per one rotation of adjust bolt.
Table 7
With adjustment bolt
Size
1
2
3
7
Rotation adjustment per single rotation of
rotation adjustment screw
8.2°
10.0°
10.9°
10.2°
- 23 -
Fig. 2
2020-10-13 10:38
DI987004
