- 23 -
(4) Select the digital output port.
(2) Select box operation is enabled when “Status signal output to digital output port” is enabled. Select the
digi
tal output port that outputs the status signal when “Hold / Release success” or “Hold / Release failure” is
detected.
-
“Hold/Release success”: default output DO[101]
-
“Hold/Release failure”: default output DO[102]
* Digital output port can be selected within DO[101] to DO[112]
* you select the same digital output port for different status signals, a warning message will be displayed.
2. Test run
The manual operation of the magnet gripper unit can be checked.
Execute the holding or releasing by tapping
the “HOLD” or “RELEASE.
3. Monitor sensor signal
The presence of a reaction of Hold position or Release position switch can be confirmed.
