SMC Networks JXC51, Operation Manual

Page: 38 / 78

- 37 -
No.JXC
※
-OMX0011-A
Details of step data
Setting name Range Description
No. 0 to 63 Number of the step data.
Movement MOD
3 options
(See the right
descriptions.)
The setting to specify the coordinate system for the target position.
Software TB Description
Blank Disable The step data is ineffective.
Absolute Absolute
The target position will be defined by the absolute
coordination based on the zero point.
Relative Relative
The target position will be defined by the relative
coordination based on the current position.
Speed
Minimum value
to "Max speed"
of the basic
parameter
*1)
The speed to move to the target position (Unit: mm/s)
Position
"Stroke (-)" to
"Stroke (+)" of
the basic
parameter
The target position (Unit: mm)
Acceleration
1 to "Max ACC/
DEC" of the
basic parameter
The acceleration to reach to the Speed (Unit: mm/s
2
)
Deceleration
1 to "Max ACC/
DEC" of the
basic parameter
The deceleration to reach to the Speed (Unit: mm/s
2
)
Pushing force
0 or
Minimum value
to "Max force" of
the basic
parameter
*1)
The setting to define the pushing operation or the positioning operation.
For the positioning operation, the value specifies the force as the percentage
against the maximum force (Unit: %).
The maximum force changes depending on the electric actuator. Please refer
to the manual and the rated force of the electric actuator.
Value Operation Description
0
Positioning
operation
The electric actuator moves to the position
specified in the "Position".
1-100
Pushing
operation
The electric actuator moves to the position
specified in the "Position" and then, performs a
pushing action with a force not more than the set
force.
Trigger LV
Minimum value
to "Max force" of
the basic
parameter
*1)
●
Effective only for the pushing operation (when the value for the "Pushing force"
is from 1 to 100).
This is the setting to define the conditions where the INP will be turned ON.
When the electric actuator generates a force over this value, INP will be turned
ON. (Unit: %)
●
For the positioning operation, this value is ignored.