2 Transportation / Installation
2
-
2
2-2
Installation
2-2-1
Location
The equipment should not be used or stored in the following conditions: Those conditions will cause
not only malfunction but also failures.
•
Environment where the equipment is exposed
to rainwater, moisture, salt water or oil.
•
Locations where the equipment is exposed to
dust or particles
•
Locations where the equipment is exposed to
flammable, combustible or explosive fumes.
•
Locations where the equipment is exposed to
corrosive gas or solvent.
•
Locations where the equipment is exposed to
direct sunlight or radiated heat.
•
Locations where ambient temperature is
beyond following range:
On-stream: 36 to 104
°
F (2 to 40
o
C)
Storage: 32 to 122
°
F (0 to 50
o
C)
(when there is no drain water
inside of the piping)
•
Locations where temperature changes rapidly.
•
Locations where strong electromagnetic noise
is generated.
•
Circumstances where static electricity is
produced or discharged through the body of the
equipment
•
Locations where strong high frequency shock
wave is generated
•
Locations where danger of thunder is apparent.
•
Locations where loading on vehicles, marine
vessels, and so on
•
Locations where altitude is higher than 2,000
meters
•
Circumstances where strong vibration or
impact are transmitted.
•
Circumstances where too much force and
weight are put on the body of the equipment
that causes it to deform.
•
Circumstances where not enough clearance
spaces to do maintenance
Spaces needed for maintenance
Front
: 2feet (0.6m)
Rear
: 2feet (0.6m)
Top
: 2feet (0.6m)
Right
: 2feet (0.6m)
Left
: 2feet (0.6m)
•
Locations where ventilation grille of the
equipment can be blocked.
•
Locations where the dryer could intake warm air
(for example from a compressor or other
dryers).
