④Each components of cylinder【Fig 15】
Cover entirely with grease.
Fig 15
4．Mounting of packing
①Rod packing【Fig 16】
Note the direction, when mounting the packing.
Then, apply the grease on the packing and bearing evenly.
Fig 16
②Piston packing
Make sure not to twist the packing, when mounting.
③Cushion packing【Fig 17】
Note the direction when mounting the packing..
Rod side Head side
Fig 17
④Tube gasket
Pay attention not to make the gasket come off.
－
20
－
Width of two
Sliding part
Taper
Bearing
Sliding part
≒1mm
grease
