HRX-OM-M091
Chapter 5 Simple communication protocol function
HRS Series
5.3 Setting and checking
5-7
Slave addresses
（
simple communication protocol
）
Setting and checking
9.
Press the [SEL] key 3 times.
The set screen of slave addresses (simple communication protocol) is displayed on the
digital display.
PV
SV
10.
Select slave addresses (simple communication protocol) from the table below with [
▲
] key
or [
▼
] key, and confirm by pressing “SEL”.
Table 5.3-6
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
to
Sets of slave addresses for simple
communication protocol.
Set range is 1 to 99.
Communication speed (simple communication protocol)
Setting and checking
11.
Press the [SEL] key once.
The set screen of communication speed (simple communication protocol) is displayed on
the digital display.
PV
SV
12.
Select communication speed (simple communication protocol) from the table below with
[
▲
] key or [
▼
] key, and confirm by pressing “SEL”.
Table 5.3-7
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
serial protocol setting is simple
communication protocol.
1200bps
2400bps
4800bps
9600bps
○
19200bps
