HRX-OM-M091
Chapter 2 Contact input/output communication
HRS Series
2.4 Setting and checking
2-15
Contact output 3 selected alarm
Setting and checking
35.
Press the [SEL] key once.
The set screen of contact output 3 selected alarm is displayed on the digital display.
PV
SV
36.
Select contact output 3 selected alarm from the table below with [
▲
] key or [
▼
] key, and
confirm by pressing “SEL”.
Table 2.4-19
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of contact output 1 is selected
alarm status signal.
to
Sets selection alarm.
Set range is AL.01 to AL.36.
Communication mode
Setting and checking
37.
Press the [SEL] key once.
The set screen of communication mode is displayed on the digital display.
PV
SV
38.
Select communication mode
【
DIO
】
from the table below with [
▲
] key or [
▼
] key, and
confirm by pressing “SEL”.
Table
2.4-20
List of set values
Set value
Explanation
Initial value
(Default setting)
Sets LOCAL mode.
○
Sets DIO mode.
Sets SERIAL mode.
