HRX-OM-M091
Chapter 2 Contact input/output communication
HRS Series
2.4 Setting and checking
2-13
Contact output 2 selected alarm
Setting and checking
29.
Press the [SEL] key once.
The set screen of contact output 2 selected alarm is displayed on the digital display.
PV
SV
30.
Select contact output 2 selected alarm from the table below with [
▲
] key or [
▼
] key, and
confirm by pressing “SEL”.
Table 2.4-16
List of set values
Set values
Explanation
Initial value
(Default setting)
Setting/checking are not available unless the
function setting of contact output 2 is selected
alarm status signal.
to
Sets selection alarm.
Set range is AL.01 to AL.36.
Contact output 3 function
Setting and checking
31.
Press the [SEL] key once.
The set screen of contact output 3 function is displayed on the digital display.
PV
SV
