Polyester band
Cardboard box
Wooden skid
24
Be sure to read this before handling the products. Refer to the back cover for safety instructions.
For temperature control equipment precautions, refer to the “Handling Precautions for SMC
Products” and the “Operation Manual” on the SMC website: http://www.smc.eu
HRR
Series
Specifi c Product Precautions 1
Design
Warning
1. This catalogue shows the specifi cations of a single unit.
1) Check the specifi cations of the single unit (contents of this
catalogue) and thoroughly consider the adaptability between
the user’s system and this unit.
2) Although the protection circuit as a single unit is installed,
prepare a drain pan, water leakage sensor, discharge air
facility, and emergency stop equipment, depending on the
user’s operating condition. Also, the user is requested to
carry out the safety design for the whole system.
2. When attempting to cool areas that are open to the
atmosphere (tanks, pipes), plan your piping system
accordingly.
When cooling open-air external tanks, arrange the piping so that
there are coil pipes for cooling inside the tanks, and to carry
back the entire fl ow volume of circulating fl uid that is released.
3. Use non-corrosive material for fl uid contact parts of
circulating fl uid.
The recommended circulating fluid is the tap water or 15%
ethylene glycol aqueous solution. Using corrosive materials
such as aluminium or iron for fl uid contact parts such as piping
may cause clogging or leakage in the circulating fl uid circuit.
Therefore, take suffi cient care when selecting fl uid contact part
materials such as piping.
4. Design the piping so that no foreign matter enter
the chiller.
If foreign matter such as scales in the piping enter the circulat-
ing fl uid, this may cause the pump to malfunction.
Selection
Warning
1. Model selection
For selecting a model of thermo-chiller, it is required to know
the heat generation amount of the user’s equipment. Obtain
the heat generation amount, referring to “Cooling Capacity
Calculation” on pages 22 and 23 before selecting a model.
Handling
Warning
1. Thoroughly read the Operation Manual.
Read the Operation Manual completely before operation, and
keep this manual available whenever necessary.
Warning
1. This product is heavy. Pay attention to safety and
position of the product when it is transported,
carried and moved.
2. Read the Operation Manual carefully to move the
product after unpacking.
Caution
1. Never put the product down sideway as this may
cause failure.
The product will be delivered in the packaging shown below.
Transportation / Carriage / Movement
Model
Weight [kg]
∗
1
Dimensions [mm]
HRR012-A
HRR018-A
54
Height 575 x Width 610 x Depth 820
HRR012-W
HRR018-W
55
HRR024-A
HRR030-A
61
Height 665 x Width 610 x Depth 820
HRR024-W
HRR030-W
60
∗
1 For models with an option, the weights are increased as below.
Option
Description
Additional weight
DM
With electric conductivity control function,
Applicable to DI water piping
+1 kg
M
Applicable to DI water piping
Not changed
T
High-pressure pump mounted
+5 kg
Summary of Contents for HRR Series
Page 30: ......
