10 / 17
FGX-OM-F001-A
2. Construction and names of individual parts
No. Description
Part No.
Material
quantity
(1)
Case
-
See 3.
Specifications
1
(2)
Cover
-
See 3.
Specifications
1
(3)
Element
Refer to 6. Maintenance parts (1) Replacement Element
See 3.
Specifications
1
(4)
Hexagon bolt
-
Carbon steel
1
(5)
Differential
pressure
indicator
Refer to 6. Maintenance parts (2) Replacement
Differential pressure indicator
Aluminum alloy
Nylon
1
(6)
O-ring
Refer to 6. Maintenance parts (3) Replacement O-ring
and seal bracket.
See 3.
Specifications
1
(7)
O-ring
Refer to 6. Maintenance parts (3) Replacement O-ring
and seal bracket.
See 3.
Specifications
1
(8)
Seal washer
Refer to 6. Maintenance parts (3) Replacement O-ring
and seal bracket.
See 3.
Specifications
1
Figure2-1
Name of individual parts and dimensions
Figure 2-2
(5)
Differential pressure indicator
(1)
2)
(3)
(4)
(6)
(7)
(8)
IN
OUT
port
DRAIN
【
Differential pressure indicator
】
1.
When the differential pressure increases to
0.13Mpa (guideline for replacement) due to
clogging, a red ring floats and becomes visible in
the view port.
2. Once it is visible, it stays floating even when the
pump is stopped unless it is reset.
【
Differential pressure indication switch
】
1.
When the differential pressure increases to
0.13Mpa (guideline for replacement) due to
clogging, a red ring floats and becomes visible in
the view port. At the same time, the micro switch in
the switch box is actuated.
2. Automatically recovers when the pump stops.
Reset button
View port
View port
Width across flats
Blanking cap
Differential
pressure
indicator
Differential
pressure
indication switch
Table2-1 Parts
