These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution
Warning
result in death or serious injury.
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
determined by a knowledgeable and experienced
Warning
1. Operating pressure
Do not use the product beyond the operating pressure range.
Do not use in locations where peak pressure exceeds the operating pressure range due to water
hammer, surge pressure, etc.
2. Operating temperature
Do not use the product beyond the operating temperature range.
Do not use at temperatures at or above the bo
3. Fluid
-Do not use fluids other those indicated in the drawings and catalog.
- Do not use the product for toxic, corrosive or flammable fluids.
-Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
-Never use the product with gases.
-Do not use any fluid which will cause the seal, O
may deteriorat
4. Operating environment
-Do not use in operating conditions or environments where changes in color or deterioration of
material due to corrosion occur.
-Do not use this product in a place where shock or vibrations occur.
-Do not use the hydraulic filter outdoors.
Caution
5. Rated flow rate
-
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
Caution
Check the O
replace it with a new O
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
Return Filter
Be sure to read this before handling the products.
These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution
:
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
minor or moderate injury.
Warning
: Warning indicates a hazard with a medium level of risk which, if not avoided, could
result in death or serious injury.
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
determined by a knowledgeable and experienced
Warning
1. Operating pressure
Do not use the product beyond the operating pressure range.
not use in locations where peak pressure exceeds the operating pressure range due to water
hammer, surge pressure, etc.
2. Operating temperature
Do not use the product beyond the operating temperature range.
Do not use at temperatures at or above the bo
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
Never use the product with gases.
Do not use any fluid which will cause the seal, O
may deteriorate these causing leakage.
4. Operating environment
Do not use in operating conditions or environments where changes in color or deterioration of
material due to corrosion occur.
Do not use this product in a place where shock or vibrations occur.
t use the hydraulic filter outdoors.
Caution
Rated flow rate
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
Caution
Check the O-ring of each part when replacing the element. If it
replace it with a new O
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
Return Filter
Be sure to read this before handling the products.
These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
minor or moderate injury.
Warning indicates a hazard with a medium level of risk which, if not avoided, could
result in death or serious injury.
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
determined by a knowledgeable and experienced
Warning
1. Operating pressure
Do not use the product beyond the operating pressure range.
not use in locations where peak pressure exceeds the operating pressure range due to water
hammer, surge pressure, etc.
2. Operating temperature
Do not use the product beyond the operating temperature range.
Do not use at temperatures at or above the bo
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
Never use the product with gases.
Do not use any fluid which will cause the seal, O
e these causing leakage.
4. Operating environment
Do not use in operating conditions or environments where changes in color or deterioration of
material due to corrosion occur.
Do not use this product in a place where shock or vibrations occur.
t use the hydraulic filter outdoors.
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
ring of each part when replacing the element. If it
replace it with a new O-ring.
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
Return Filter/
Be sure to read this before handling the products.
These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
minor or moderate injury.
Warning indicates a hazard with a medium level of risk which, if not avoided, could
result in death or serious injury.
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
determined by a knowledgeable and experienced
Range of Operating Conditions
Do not use the product beyond the operating pressure range.
not use in locations where peak pressure exceeds the operating pressure range due to water
hammer, surge pressure, etc.
Do not use the product beyond the operating temperature range.
Do not use at temperatures at or above the bo
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
Never use the product with gases.
Do not use any fluid which will cause the seal, O
e these causing leakage.
Do not use in operating conditions or environments where changes in color or deterioration of
material due to corrosion occur.
Do not use this product in a place where shock or vibrations occur.
t use the hydraulic filter outdoors.
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
Replacement of O
ring of each part when replacing the element. If it
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
/Safety Instructions
Be sure to read this before handling the products.
These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
determined by a knowledgeable and experienced
Range of Operating Conditions
Do not use the product beyond the operating pressure range.
not use in locations where peak pressure exceeds the operating pressure range due to water
Do not use the product beyond the operating temperature range.
Do not use at temperatures at or above the boiling point of the fluid.
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
Do not use any fluid which will cause the seal, O-ring or element to swell or deteriorate. The fluid
e these causing leakage.
Do not use in operating conditions or environments where changes in color or deterioration of
Do not use this product in a place where shock or vibrations occur.
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
Replacement of O
ring of each part when replacing the element. If it
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
Safety Instructions
Be sure to read this before handling the products.
These safety instructions are intended to prevent hazardous situations and/or
Make sure to follow every instruction since they are for safety.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
designer of the system.
Range of Operating Conditions
Do not use the product beyond the operating pressure range.
not use in locations where peak pressure exceeds the operating pressure range due to water
Do not use the product beyond the operating temperature range.
iling point of the fluid.
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
ring or element to swell or deteriorate. The fluid
Do not use in operating conditions or environments where changes in color or deterioration of
Do not use this product in a place where shock or vibrations occur.
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
Replacement of O-ring
ring of each part when replacing the element. If it
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
designer of the system.
not use in locations where peak pressure exceeds the operating pressure range due to water
Do not use the product beyond the operating temperature range.
iling point of the fluid.
Do not use fluids other those indicated in the drawings and catalog.
Do not use the product for toxic, corrosive or flammable fluids.
。
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
ring or element to swell or deteriorate. The fluid
Do not use in operating conditions or environments where changes in color or deterioration of
Do not use this product in a place where shock or vibrations occur.
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
ring of each part when replacing the element. If it is swollen or damaged,
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
FGX
Safety Instructions
These safety instructions are intended to prevent hazardous situations and/or equipment damage.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
designer of the system.
not use in locations where peak pressure exceeds the operating pressure range due to water
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
ring or element to swell or deteriorate. The fluid
Do not use in operating conditions or environments where changes in color or deterioration of
Do not use flow rates beyond the rated flow rate indicated in the drawings and catalog.
is swollen or damaged,
Be sure to follow the instructions shown below, considering prevention of damage to the
element, maintaining performance and efficiency of the maintenance check.
6 /
FGX-OM-F001
equipment damage.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
Incorrect handling can result in unexpected accidents. Equipment compatibility should be
not use in locations where peak pressure exceeds the operating pressure range due to water
Do not use fluids which cause corrosion or swelling of the material used for each part of the filter.
ring or element to swell or deteriorate. The fluid
Do not use in operating conditions or environments where changes in color or deterioration of
is swollen or damaged,
Be sure to follow the instructions shown below, considering prevention of damage to the
/ 17
F001-A
equipment damage.
Caution indicates a hazard with a low level of risk which, if not avoided, could result in
Warning indicates a hazard with a medium level of risk which, if not avoided, could
