![background image](http://html.mh-extra.com/html/smc-networks/ez-connect/ez-connect_user-manual_1300010017.webp)
I
NSTALLATION
7
Network Connection
To connect the USB/Ethernet Converter to the local network,
follow these steps:
1.
Prepare a straight-through twisted-pair cable, maximum length
100 meters (328 feet). Use Category 3, 4 or 5 cable for
connection to 10 Mbps Ethernet, or Category 5 cable for
connection to 100 Mbps Fast Ethernet.
2.
Connect one end of the cable to the RJ-45 port on the USB/
Ethernet Converter, and the other end to any available station
port on a network hub or switch. When inserting an RJ-45
plug, be sure the tab on the plug clicks into position to ensure
that it is properly seated.
3.
Check that the USB/Ethernet Converter has a valid connection
by observing the Link/Act LED. If the indicator fails to light
when you connect to a network hub or switch, see
“Troubleshooting” on page 8.
Summary of Contents for EZ Connect
