![background image](http://html.mh-extra.com/html/smc-networks/ez-connect/ez-connect_user-manual_1300010015.webp)
5
I
NSTALLATION
Equipment Checklist
After unpacking the EZ Connect™ USB/Ethernet Converter, check
the contents of the box to be sure you have received the following
components:
•
SMC2206USB/ETH
•
Driver diskette
•
SMC Warranty Registration Card
•
This User Guide
Power Requirements
USB devices can be either self-powered or bus-powered. A device
which has no power connector is bus-powered, and derives its
operating power from the USB connection directly. The EZ
Connect™ USB/Ethernet Converter is bus-powered – all you need
to do is plug it into a PC or self-powered USB hub.
System Requirements
To use the EZ Connect™ USB/Ethernet Converter you must have:
•
A host PC that supports the Universal Serial Bus
•
16 MB of RAM
•
Windows 98/2000/Me/XP or Linux.
You also need to provide a standard twisted-pair Ethernet cable to
connect to a local network 10BASE-T/100BASE-TX hub or switch.
Summary of Contents for EZ Connect
