![background image](http://html.mh-extra.com/html/smc-networks/ez-connect/ez-connect_user-manual_1300010016.webp)
I
NSTALLATION
6
Procedure
Note:
Please view the README.TXT file on the driver diskette
for product related information.
Windows 98
1.
Connect the USB cable’s Type -A connector into the USB port
on the PC.
2.
Connect the USB/Ethernet Converter to a local network hub or
switch. See the guidelines under “Network Connection” on
page 6.
3.
The “New Hardware” Wizard displays.
4.
When prompted for the installation medium, check the floppy
disk drive and insert the driver diskette.
5.
You will observe several loading status windows. Follow the
displayed instructions.
6.
When prompted to restart the PC, remove the driver diskette
and click “Yes.”
Note:
If the Wizard does not appear when you plug in the
converter, please view the section “Is USB correctly
installed” in the README.TXT file on the adapter driver
diskette.
Summary of Contents for EZ Connect
