SMC Networks EZ Connect Vision SMCWIPCAM-PZ Manual Download Page 55

53 

3. You may copy and distribute the Program (or a work based on it, under Section 2) in 
object code or executable form under the terms of Sections 1 and 2 above provided that 
you also do one of the following:  

a) Accompany it with the complete corresponding machine-readable source code, which 
must be distributed under the terms of Sections 1 and 2 above on a medium customarily 
used for software interchange; or,   

b) Accompany it with a written offer, valid for at least three years, to give any third party, 
for a charge no more than your cost of physically performing source distribution, a 
complete machine-readable copy of the corresponding source code, to be distributed 
under the terms of Sections 1 and 2 above on a medium customarily used for software 
interchange; or,  

c) Accompany it with the information you received as to the offer to distribute 
corresponding source code.  (This alternative is allowed only for noncommercial 
distribution and only if you received the program in object code or executable form with 
such an offer, in accord with Subsection b above.)  

The source code for a work means the preferred form of the work for making 
modifications to it.  For an executable work, complete source code means all the source 
code for all modules it contains, plus any associated interface definition files, plus the 
scripts used to control compilation and installation of the executable.  However, as a 
special exception, the source code distributed need not include anything that is normally 
distributed (in either source or binary form) with the major components (compiler, kernel, 
and so on) of the operating system on which the executable runs, unless that 
component itself accompanies the executable. 

If distribution of executable or object code is made by offering access to copy from a 
designated place, then offering equivalent access to copy the source code from the 
same place counts as distribution of the source code, even though third parties are not 
compelled to copy the source along with the object code.  

 

4. You may not copy, modify, sublicense, or distribute the Program except as expressly 
provided under this License.  Any attempt otherwise to copy, modify, sublicense or 
distribute the Program is void, and will automatically terminate your rights under this 
License. However, parties who have received copies, or rights, from you under this 
License will not have their licenses terminated so long as such parties remain in full 
compliance. 

 

5. You are not required to accept this License, since you have not signed it.  However, 
nothing else grants you permission to modify or distribute the Program or its derivative 
works.  These actions are prohibited by law if you do not accept this License.  Therefore, 
by modifying or distributing the Program (or any work based on the Program), you 
indicate your acceptance of this License to do so, and all its terms and conditions for 
copying, distributing or modifying the Program or works based on it. 

 

  6. Each time you redistribute the Program (or any work based on the Program), the 
recipient automatically receives a license from the original licensor to copy, distribute or 
modify the Program subject to these terms and conditions.  You may not impose any 
further restrictions on the recipients' exercise of the rights granted herein. You are not 
responsible for enforcing compliance by third parties to this License. 

 

Summary of Contents for EZ Connect Vision SMCWIPCAM-PZ




























































Reviews: