17
Front View
*
The camera’s USB1.1 port supports WCN (Windows Connect Now) technology, which allows
you to use the notebook computer to set up and store your wireless networking configuration
on the USB storage device, and then retrieve the wireless settings when you connect the USB
storage device to the camera.
NOTE:
After long pressing the Unmount button for four seconds, the Power LED starts flashing.
When the Power LED resumes the steady amber light, you can remove the USB device
safely.
Rear View
1.3 Features and Benefits
MPEG4/MJPEG Dual-codec Supported
The camera provides you with excellent images by the MPEG4/ MJPEG dual-codec
selectable technology, allowing you to adjust image size and quality, and bit rate
according to the networking environment.
2-way Audio Capability
The built-in microphone of the camera provides on-the-spot audio via the Internet,
allowing you to monitor the on-site voice. In addition, you can connect an external
speaker to the camera to speak through the camera.
Day & Night Surveillance Supported
The seven Infrared LEDs around the standard lens assembly enable the camera to
capture crystal clear images in the dark environment or at night. When the Light
Sensor detects the environmental light level becomes low, the camera captures the
images in black & white mode using these infrared LEDs.
Optimal Viewing
USB Unmount Button
is used to remove the
connected USB device
safely.
External Antenna
Connector
connects the
external antenna.
GPIO Connectors
is used to connect the
external devices.
Audio-out Connector
connects an external
active speaker.
Reset Button
will restart the camera when it is
pressed quickly; when it is
pressed and held for five
seconds, the camera will resume
the factory default settings.
DC Power Connector
connects the AC power
adapter, in order to
supply power to the
camera.
Ethernet Cable Connector
connects the network cable,
which supports the NWay
protocol so that the camera
can detect the network
speed automatically.
Summary of Contents for EZ Connect Vision SMCWIPCAM-PZ
Page 59: ...SMCWIPCAM PZ...