![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-g-smcwcb-g2/ez-connect-g-smcwcb-g2_user-manual_1299026026.webp)
SMCWCB-G2
User Guide
- 11 -
clients it associates.
¾
802.11 Authentication Mode
: Select which mode the wireless adapter uses to
authenticate to an access point:
•
Automatic
causes the adapter to attempt authentication using shared, but switches it
to open authentication if shared fails.
•
Open
System
enables an adapter to attempt authentication regardless of its WEP
settings. It will only associate with the access point if the WEP keys on both the
adapter and the access point match.
•
Shared-key
only allows the adapter to associate with access points that have the
same WEP key.
For infrastructure (access point) networks, click
Preferred APs…
to specify up to four access
points to the client adapter that attempts to be associated to the access points. The four access
points have different priorities; the frontal has the higher priority.
Figure 3-7
3.2.2 Remove a profile
1. Go to the Profile Management tab.
2. Select the profile name to remove in the Profiles List.
3. Click
Remove
.
3.2.3 Switch
another
Profile
1. Go to the Profile Management tab.
2. Click on the profile name in the Profiles List.
3. Click
Activate
.
3.2.4 Export a Profile
1. From the Profile Management tab, highlight the profile to export.
2. Click
Export…
, the Export Profile window will then appear.
3. Browse the directory to export the profile.
4. Click
Save
. The profile should then be exported to the specified location.