![background image](http://html1.mh-extra.com/html/smc-networks/ez-connect-g-smcwcb-g2/ez-connect-g-smcwcb-g2_user-manual_1299026018.webp)
SMCWCB-G2
User Guide
- 3 -
3. In the screen shown below (Figure 2-3), select a Setup type. It is recommended that you
select
Install Client Utilities and Driver
. Selecting
Install Driver Only
will install the
drivers only. After selecting, click [Next] to continue the Installation. You can click [Back] to
return to the previous screen, or click [Cancel] to end the Installation.
Figure 2-3
4. The following screen will appear (Figure 2-4). Click [Browse] to change the destination
location for the software. It is recommended you keep the default location. Click [Next]
to
continue. You can click [Back] to return to the previous screen, or click [Cancel] to end the
Installation.
Figure 2-4
5. In the screen below (Figure 2-5), you can create a new Program Folder name or select one
of the
Existing Folders
. It is recommended that you keep the default Program Folder
name. Click [Next] to continue. You can click [Back] to return to the previous screen, or
click [Cancel] to end the Installation.