SMC Networks EX600-HT1A Operation Manual Download Page 48

Page: 48 / 55

-47-

No.EX

※※

-OML0011-C

■

5. Terminal Setting

Mode levels

The Terminal Setting mode is composed as shown in the diagram below.

1. Select [5. Terminal Setting] and press the

button.

2. Selects items with the

and

buttons.

3. Changes the setting with the

and

buttons.

4. When the

button is pressed, the setting will become

valid.

5. Press the

button to return to the mode selection

screen.

Mode

Outline

Default setting

Contrast

The contrast the LCD display is set in 9 stages (0 to 8).

Bright

The brightness of the LCD display is set in 5 stages (0 to 4).

Key Sound

The button click sound volume is set in 5 stages (0 to 4).

PowerSave

The time until the unit goes into POWER SAVE mode when no button
operation is performed is set 5 stages (OFF, 1 min., 3 min., 7 min. and
10 min.).

Default

All of the settings above are returned to the default settings.

Password Change

Change the password. (Refer to page

)

0000

Summary of Contents for EX600-HT1A
























































Search results

Summary of Contents for EX600-HT1A

Reviews:

Related manuals for EX600-HT1A

Brands by name

Popular brands

SMC Networks EX600-HT1A, Operation Manual

Search results

Summary of Contents for EX600-HT1A

Reviews:

Related manuals for EX600-HT1A

Brands by name

Popular brands