-35-
No.EX
※※
-OML0011-C
3. Unit parameter setting
5. Press the
button to complete the setting.
To copy the set value to units of the same type in the manifold, press the
button.
6. Press the
button.
Copy is completed, and the screen returns to the unit parameter selection screen.
1. Press the
button on the parameter selection
screen. Or select the parameters where the [unit] in the
[object] is selected, and press the
button.
2. Enter the password.
3. Select the parameter with the
and
buttons and
press the
button.
(Refer to Unit parameter setting for the details of setting.
(page
36
to
40
))
4. Select the setting value with the
,
,
and
buttons and press the
button.
