-13-
No.EX
※※
-OML0011-C
■
Mode selection
Outline of modes
The Handheld Terminal has five modes.
Each mode further consists of detailed mode levels,
which can be used to set and check each type of data.
No.
Mode
Outline
1
I/O Monitor
Displays the unit input and output status and performs forced input and output.
(Refer to page
15
)
2
Diagnosis Data
Displays the input and output status of the unit, detailed error contents and error log.
(Refer to page
24
)
3
Sys. Configuration
Sets the sysytem operation as follows. (Refer to page
27
)
1. Edits the tag name of each unit.
2. Update the unit structre memorry infomaion.
3. Select the Hold/Clear function to be set either by the SI unit switches, or by the
Handheld Terminal.
4. Clears the ON/OFF counter valve of each unit.
5. Resets the parameters of each unit to the default values.
6. Clear all error logs.
4
Parameter Setting
Sets various parameters. (Refer to page
33
)
5
Terminal Setting
Sets the operation of the Handheld Terminal as follows. (Refer to page
47
)
1. Sets the contrast of the LCD display screen.
2. Sets the brightness of the LCD display screen.
3. Sets the volume of the click sound when buttons are pressed.
4. Sets the time before entering Power Save mode when no operation is performed.
5. Returns the settings 1 to 4 above to the default values.
6. Change the password.
