background image

 

-3- 

 

No.EX

※※

-OML0011-C 

 

Safety Instructions

 

 

Caution

 

1.The product is provided for use in manufacturing industries.

 

The product herein described is basically provided for peaceful use in manufacturing industries.

 

If considering using the product in other industries, consult SMC beforehand and exchange 
specifications or a contract if necessary.

 

If anything is unclear, contact your nearest sales branch.

 

 

Limited warranty and Disclaimer/Compliance Requirements

 

The product used is subject to the following "Limited warranty and Disclaimer" and "Compliance 
Requirements".

 

Read and accept them before using the product.

 

 

Limited warranty and Disclaimer

 

1. The warranty period of the product is 1 year in service or 1.5 years after the product is 

delivered, whichever is first.

2) 

Also, the product may have specified durability, running distance or replacement parts. 
Please consult your nearest sales branch.

 

2. For any failure or damage reported within the warranty period which is clearly our 

responsibility, a replacement product or necessary parts will be provided. 

This limited warranty applies only to our product independently, and not to any other 
damage incurred due to the failure of the product.

 

3. Prior to using SMC products, please read and understand the warranty terms and 

disclaimers noted in the specified catalog for the particular products.

 

2) Vacuum pads are excluded from this 1 year warranty.

 

A vacuum pad is a consumable part, so it is warranted for a year after it is delivered.

 

Also, even within the warranty period, the wear of a product due to the use of the 
vacuum pad or failure due to the deterioration of rubber material are not covered by the 
limited warranty.

 

 

Compliance Requirements

 

1. The use of SMC products with production equipment for the manufacture of weapons of 

mass destruction (WMD) or any other weapon is strictly prohibited. 

2. The exports of SMC products or technology from one country to another are governed by 

the relevant security laws and regulation of the countries involved in the transaction. Prior 
to the shipment of a SMC product to another country, assure that all local rules governing 
that export are known and followed.

 

Summary of Contents for EX600-HT1A
























































Reviews: