- 32 -
No.EX##-OML0007
Handling care.
Please note the following points when using the open circuit detection function.
Open circuit detection setting can only be carried out by using a hand-held terminal. Setting cannot be
carried out using a PLC.
This function detects an open circuit only when the output is OFF. Therefore if the output is turned ON, an
open circuit cannot be detected.
Error display
Status LED displays the power supply and operation status. These can be checked according to the following:
LED
Status
Descriptions
OFF
Power supply for control and input is OFF, or output device is
OFF.
Green light ON
Output device is ON.
Red light ON
Output is short circuited.
Flashing red
Either of the following:
Output device contact operations count has exceeded the
set value.
Output device is not connected.
All LEDs flashing
red/green alternately
Component failure inside the digital output unit.
Stop using the product and contact SMC.
Specifications
Model
EX600-DYPB
EX600-DYNB
Output style PNP
NPN
Output connector
M12 (5 pin), Socket
Note1
Output channel
8 channels (2 channels/connector)
Rated load voltage
24 VDC (Supplied from power supply for output)
Max. load current
0.5 A/1 channel, 2 A/unit
Output
Protection
Short circuit protection
Current consumption
Max. 50 mA
Display
Green LED on (when output ON), Red LED on (short circuit at load)
Red LED flashing (ON/OFF counter is exceeded, or open circuit detected)
Enclosure
IP67 (manifold assembly)
Operating temp.
range
-10 ~ 50
o
C
Operating humidity
range
35 ~ 85 %RH (no dew condensation)
Withstand voltage
500 VAC for 1 minute between external terminals and FE
Insulation resistance
500 VDC, Min. 10 M
Ω
between external terminals and FE
Vibration resistance
10 ~ 57 Hz with constant amplitude of 0.75 mm p-p
57 ~ 150 Hz with constant acceleration of 49 m/s
2
for 2 hours in each direction of X, Y and Z direction (during de-energizing)
Environme
ntal
Impact resistance
147 m/s
2
3 times in each direction of X, Y and Z (during de-energizing)
Standard
CE marking, UL recognition (CSA)
Weight
300 g
Note 1) M12 (4 pin) connector can be connected.
