SMC Networks EX600-AX, Operation Manual

Page: 27 / 73

- 27 -
No.EX##-OML0007
Specifications
Model
EX600-DXPB EX600-DXNB EX600-DXPC □ EX600-DXNC □ EX600-DXPD EX600-DXND
Input type PNP NPN PNP NPN PNP NPN
Input connector M12 (5 pin) socket
Note1
M8 (3 pin) socket M12 (5 pin) socket
Note1
Input channels
8 channels
(2 channels/connector)
8 channels
(1 channels/connector)
16 channels
(2 channels/connector)
Sensor supplied
voltage
24 VDC (Supplied from the power supply for control and inputs)
Maximum sensor
supplied voltage
0.5 A/connector
2 A/unit
0.25 A/connector
2 A/unit
0.5 A/connector
2 A/unit
Protection Short circuit protection
Input resistance 2.7 k Ω
Rated input current Max. 9 mA
ON voltage
/ON current
Min. 17 V / Min. 5 mA
(At NPN input, between the pin for input terminal and for sensor supplied voltage of +24 V)
(At PNP input, between the pin for input terminal and for sensor supplied voltage of 0 V)
OFF voltage/OFF
current
Max. 5 V / Max. 1 mA
(At NPN input, between the pin for input terminal and for sensor supplied voltage of +24 V)
(At PNP input, between the pin for input terminal and for sensor supplied voltage of 0 V)
2 wires – 0.5 mA/Point
Note2
–
Input
Open
circuit
detection
current
Note2
3 wires – 0.5 mA/Connector
Note2
–
Current consumption Max. 50 mA Max. 55 mA Max. 70 mA
Indicator
Green LED on (Input is ON)
Red LED on (when short circuit detected at sensor power supply)
Red LED flashing (ON/OFF counter exceeded/ open circuit detected
Note2
)
Enclosure IP67 (manifold assembly)
Operating temp.
range
-10 ~ 50
o
C
Operating humidity
range 35 ~ 85 %RH (no dew condensation)
Withstand voltage 500 VAC for 1 minute between external terminals and FE
Insulation resistance 500 VDC, Min. 10 M Ω between external terminals and FE
Vibration
resistance
10 ~ 57 Hz with constant amplitude of 0.75 mm p-p
57 ~ 150 Hz with constant acceleration of 49 m/s
2
for 2 hours in each direction of X, Y and Z direction (during de-energizing)
Environme
ntal
Impact resistance 147 m/s
2
3 times in each direction of X, Y and Z (during de-energizing)
Standard CE marking, UL recognition (CSA)
Weight 300 g 275 g 340 g
Note 1) M12 (4 pin) connector can be connected.
Note 2) Applicable only for unit with open circuit detection function.