6
7
EX500 Part Names
Accessory
Communication
connector
1
2
3
4
5
6
7
8
Note1: For wiring method, refer to subsection "Wiring" ( page 9 ) of section "EX500" in this
manual.
Note2: For display and setting method, refer to subsection "Display/Switch Setting" ( page 18 )
of section "EX500" in this manual.
Power supply connector
Communication port A
( COM A )
Communication port B
( COM B )
Communication port C
( COM C )
Communication port D
( COM D )
Display
Connect with CC-Link line by using the accessory
bus adapter . ( Note1 )
Name
No.
Application
Supply power for output devices such as solenoid
valve, for input devices such as sensor, and for
controlling GW/SI by using power supply connector
cable. ( Note1 )
Display the power supply status and communication
status with PLC. ( Note2 )
Station number switch
protective cover
Set station numbers and transmission speed by
using the switches under this cover. ( Note2 )
Connect SI unit ( manifold valve ) or Input unit by
using branch cable with M12 connectors. ( Note1 )
Dimensions ( unit: mm )
88
160
136
48.8
46
10
L
L
93.5 or l
es
s
EX500 body
unit side
OUT
IN
36.5
45
18.5
Cutout Dimensions for Mounting (Tolerance : 0.2)
148
6
8
5
4 M5
*
Tightening torque :
(1.5 0.2 ) Nm
Bus adapter ( accessory )
Installation ( unit: mm )
Thread mounting
Secure at four positions with screws with head diameter of 5.2 or more and thread
length of 15mm or more.
