314
Part Descriptions
Operating Method
Alarm Details
Key Arrangement and Functions
RET
ESC/
MODE
STOP
SMC LC5-1-T1
TEACHING BOX
POWER
PARA
JOG
ALM
AL-RES
MON
I/O
TEST
TEACH
Power supply LED (Green)
ID number
Alarm LED (Red)
Mode indication LED [7] (Orange)
Parameter (2 digits)
Data indication (4 digits)
RET
ESC/
MODE
STOP
Function
Mark
Key
description
STOP
RET
ESC/
MODE
STOP
RET
ESC/
MODE
UP
L
R
DOWN
Increases a numerical value.
Reduces a numerical value.
Moves a numerical value place to the left.
Rotates the motor counter clockwise during JOG operation.
Moves a numerical value place to the right.
Rotates the motor clockwise during JOG operation.
Selects a mode.
Completes each mode and returns to the mode level.
Becomes the emergency stop key when the actuator is moving.
Determines the mode and records data.
Caution
STOP key only stops the driver that is in communication.
Presumed cause and solution
Alarm no.
1
2
3
4
Alarm description
Emergency
stop input
Temperature
abnormality
Power supply
abnormality
Limit switch
abnormality
Emergency stop input is turned OFF (open).
The temperature inside the driver is high.
Check the installation environment and
operation frequency.
Operating beyond the range of the specified
power supply.
Adjust the power supply.
As shown above, 6 modes are available. (I/O mode and MON mode do not
function with this driver.) When the communication mode is started by the
teaching box, a menu can be selected with [ESC/MODE]. Select the mode
indication LED for the mode to be implemented (all mode indication LEDs
turn Off in the ID mode) and press [RET] to start each mode.
Refer to the instruction manual for the operation of each mode.
ID mode
PARA mode
JOG mode
TEACH mode
TEST mode
I/O mode
MON mode
AL-RES mode
ID number setting
Parameter setting
JOG movement
Teaching
Test
Does not function with this driver.
Does not function with this driver.
Alarm reset
ESC/MODE
RET
ESC/MODE
Menu levels
Data levels
Home position switch and limit switch are
operating. Malfunction such as loss of
synchronism may have occurred. Check
the equipment.
Series
LC6C