SMC Networks BARRICADE SMC7901WBRA2 B1, User Manual

Page: 93 / 150

C
HAPTER
8
| Firewall Configuration
Port Forwarding
– 93 –
◆
Local IP Address — Specifies the IP address on the local network to
allow external access to.
◆
Local Port — Specifies the port range through which traffic is
forwarded.
◆
Remote IP Address — Specifies the source IP address on the WAN to
allow access from. Leaving this parameter blank allows access from all
traffic.
◆
Public Port — Specifies the external port range on the WAN to allow
access from.
◆
Interface — Selects the WAN interface on which the port forwarding
rule is to be applied.
◆
Add — Adds the configured port forwarding parameters to the Current
Port Forwarding Table.
C
URRENT
P
ORT
F
ORWARDING
T
ABLE
The Current Port Forwarding Table displays the entries that are allowed to
forward packets through the ADSL Router’s firewall.
◆
Select — Selects an entry in the Current Port Forwarding Table.
◆
Local IP Address — Displays an IP address on the local network to
allow external access to.
◆
Protocol — Displays the protocol used for forwarding of this port.
◆
Local Port — Displays the local port range.
◆
Comment — Displays a useful comment to identify the nature of the
port to be forwarded.
◆
Enable — Displays if the configured port forwarding setup has been
enabled.
◆
Remote Host — Displays the source IP address on the WAN to allow
access from.
◆
Public Port — Displays the external port range on the WAN to allow
access from.
◆
Interface — Displays the WAN interface on which the port forwarding
rule is applied.
◆
Delete Selected — Deletes a selected entry from the Current Port
Forwarding Table.
◆
Delete All — Deletes all entries in the table.