manualshive.com logo in svg

SMC Networks Barricade SMC7004ABR, User Manual

Share
Download
SMC Networks Barricade SMC7004ABR User Manual Download Page 87

6-1

C

HAPTER

 6

C

ONFIGURING

 P

RINTER

 S

ERVICES

If you want to use the print server built into the Barricade, then you 
must first install the Port Monitor program as described in the 
following section for Windows 95/98/ME/NT/2000.

To configure the Barricade Print Server for Windows 95/98/ME/
NT/2000, or Unix, see “Configure the Print Server” on page 6-4.

Install the Printer Port Monitor

Skip this section if you are using Unix.

For Windows 95/98/ME/NT/2000 clients, you need to install the 
port monitor program as described in this section.

1. Insert the installation CD-ROM into your CD-ROM drive. Under 

the PrintSvr directory, run the “setup.exe” program. The SMC 
Port Monitor installation program advises you to close all other 
Windows programs currently running on your computer. Click 
“Next” to continue.

Summary of Contents for Barricade SMC7004ABR

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands