manualshive.com logo in svg

SMC Networks Barricade SMC7004ABR, User Manual

Share
Download
SMC Networks Barricade SMC7004ABR User Manual Download Page 51

C

ONFIGURING

 

THE

 B

ARRICADE

4-19

Viewing Network and Device Status

You can use the following screen to display WAN/LAN connection 
status, firmware and hardware version numbers, any illegal 
attempts to access your network, as well as information on all 
DHCP clients connected to your network.

The following items are included in this screen:

Field

Description

INTERNET

Displays WAN connection type and status.

GATEWAY

Displays system IP settings, as well as DHCP, 

NAT, Firewall and Printer status.

INFORMATION

Displays the number of attached clients, the 

firmware versions, the physical MAC address 

for each media interface, as well as the 

hardware version and serial number.

Security Log

Displays any illegal attempts to access your 

network.

Save

Click on this button to save a security log file.

Summary of Contents for Barricade SMC7004ABR

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands