manualshive.com logo in svg

SMC Networks Barricade SMC7004ABR, User Manual

Share
Download
SMC Networks Barricade SMC7004ABR User Manual Download Page 16

F

EATURES

 

AND

 B

ENEFITS

1-2

Features and Benefits

• Internet connection to xDSL or Cable modem via a 10/100 Mbps 

WAN port

• Internet connection to ISDN TA or PSTN modem via an RS-232 

console port

• Local network connection via 10/100 Mbps Ethernet ports

• Built-in Print Server for any client attached to the LAN

• DHCP for dynamic IP configuration, and DNS for domain name 

mapping

• Firewall with client privileges, hacker prevention, and NAT

• NAT also enables multi-user access with a single-user account, 

and virtual server functionality (providing protected access to 
Internet services such as Web, FTP, mail and Telnet)

• Virtual Private Network support using PPTP, L2TP or IPSec 

pass-through

• User-definable application sensing tunnel supports applications 

requiring multiple connections

• Supports CHAP authentication protocol for dial-up 

identification

• Supports PPP dial-out connection

• Easy setup through a Web browser on any operating system 

that supports TCP/IP

• Compatible with all popular Internet applications 

Summary of Contents for Barricade SMC7004ABR

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands