manualshive.com logo in svg

SMC Networks Barricade SMC7004ABR, User Manual

Share
Download
SMC Networks Barricade SMC7004ABR User Manual Download Page 31

3-1

C

HAPTER

 3

C

ONFIGURING

 C

LIENT

 PC

S

TCP/IP Configuration

To access the Internet through the Barricade

™

 Broadband Router, 

you must configure the network settings of the computers on your 
LAN to use the same IP subnet as the Barricade. The default 
network settings for the Barricade are:

IP Address:  192.168.2.1 
Subnet Mask: 255.255.255.0

Note:

These settings can be changed to fit your network 
requirements, but you must first configure at least one 
computer as described in Chapter 5 to access the 
Barricade’s Web configuration interface. (See Chapter 4 for 
information on configuring the Barricade.)

If you have not previously configured TCP/IP for your computer, 
refer to “Installing TCP/IP Protocol in Your PC” on page 5-1. 

All PCs connected to the Barricade must be set to the same IP 
subnet as the Barricade. The default subnet address of the 
Barricade is 192.168.2.X (where X means 2–254) and the subnet 
mask is 255.255.255.0. You can set the IP address for client PCs 
either by automatically obtaining an IP address from the 
Barricade’s DHCP service or by manual configuration. See “Setting 
TCP/IP to Work with the Barricade” on page 5-3.

Summary of Contents for Barricade SMC7004ABR

















































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands