![background image](http://html1.mh-extra.com/html/smc-networks/barricade-g-smc2804wbrp-g/barricade-g-smc2804wbrp-g_user-manual_1300255008.webp)
Barricade g Wireless Router with USB Print Server
Manual
5.
From the TCP/IP Properties dialog box, click the [Obtain an IP address automatically]
option.
6.
Next click on the [Gateway] tab and verify the Gateway field is blank. If there are IP
addresses listed in the Gateway section, highlight each one and click [Remove] until the
section is empty.
7.
Click the [OK] button to close the TCP/IP Properties window.
8.
On the Network Properties Window, click the [OK] button to save these new changes.
NOTE
: Windows may ask you for the original Windows installation disk or additional files.
Check for the files at c:\windows\options\cabs, or insert your Windows CD-ROM into your
CD-ROM drive and check the correct file location, for example, D:\win98, D:\win9x.
(assume “D” is your CD-ROM drive).
9.
Windows may prompt you to restart the PC. If so, click the [Yes] button. If Windows does
not prompt you to restart your computer, do so anyways to ensure your settings.
4.2 | Configuring Windows 2000
1.
Access your Network settings by clicking [Start], choose [Settings], and then select [Control
Panel]
2.
In the Control Panel, locate and double-click the [Network and Dial-up Connections] icon
3.
Locate and double-click the [Local Area Connection] icon for the Ethernet adapter that is
connected to the Barricade. When the Status dialog box window opens, click the
[Properties] button.
4.
On the [Local Area Connection] Properties box, verify the box next to Internet Protocol
(TCP/IP) is checked. Then highlight the Internet Protocol (TCP/IP), and click the Properties
button.
5.
Select Obtain an IP address automatically to configure your computer for DHCP. Click the
[OK] button to save this change and close the Properties window.
6.
Click the [OK] button again to save these new changes.
7.
Reboot your PC.
8