SMC Networks Barricade g SMC2804WBRP-G User Manual Download Page 43

Page: 43 / 70

Barricade g Wireless Router with USB Print Server

Manual

8.10 | Status

The Status screen displays WAN/LAN connection status, firmware, and hardware version numbers,

illegal attempts to access your network, as well as information on DHCP clients connected to your
network.

INTERNET

: Displays WAN connection type, status, and if required connection buttons.

GATEWAY

: Displays system IP settings, as well as DHCP, UPnP, Wireless, Firewall, and Printer

status.

INFORMATION

: Displays the number of attached clients, the firmware versions, and the MAC

Address for each media interface, as well as the hardware version and serial number.

Security Log

: Displays illegal attempts to access your network.

•

[Save] Click on this button to save a security log file.

•

[Clear] Click on this button to delete the access log.

•

[Refresh] Click on this button to refresh the screen.

DHCP Client Log

: Displays information on all DHCP clients on your network.

For additional information on the SMC2804WBRP-G, please visit

www.smc.com

Summary of Contents for Barricade g SMC2804WBRP-G







































































Search results

Summary of Contents for Barricade g SMC2804WBRP-G

Reviews:

Related manuals for Barricade g SMC2804WBRP-G

Brands by name

Popular brands

SMC Networks Barricade g SMC2804WBRP-G, User Manual

Search results

Summary of Contents for Barricade g SMC2804WBRP-G

Reviews:

Related manuals for Barricade g SMC2804WBRP-G

Brands by name

Popular brands