62
If you enable ACL, ensure that the IP address of the host is in the ACL list.
Click
Add
. The page as shown in the following figure appears:
Enter the IP address of the desired device in the
IP Address
field and click
Apply
to apply the settings.
3.4.4
Diagnostics
Choose
Management
>
Diagnosis
. The page as shown in the following figure appears:
In this page, you can test the connection status of the device. Click
Return Diagnostics Test
to run diagnostics.
3.4.5
Log Configuration
Choose
Management
>
Log Configuration
. The
SYSTEM LOG
page as shown in the following figure appears:
In this page, you can enable the log function. You can set
Mode
to
Local
,
Remote
, or
Both
.
Local
indicates to save
the log in the local computer.
Remote
indicates to send the log to the remote log server.
Both
indicate to save the
log in the local computer and the remote log server.
To log the events, do as follows:
Step 1
Select Enable Log.
Step 2
Select a mode from the drop-down list.
