37
3.3.5.1
Inbound IP Filtering
In the
FILTERING OPTIONS
page, click
Inbound IP Filtering
. The
INCOMING IP FILTERING
page as
shown in the following figure appears:
Click
Add
to add an inbound IP filter. The page as shown in the following figure appears:
Enter the
Filter Name
and specify at least one of the following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port.
Then, click
Apply
to save the settings.
Note:
The settings apply only when the firewall is enabled.
The
ACTIVE INBOUND FILTER
in the
INCOMING IP FILTERING
page displays detailed information of
each created inbound IP filter. Click
Delete
to delete an IP filter. Note that the
Delete
button appears only when at
least one IP filter exists.
