42
The following table describes the parameters in this page.
Field
Description
Traffic Class Name
Enter the name of the traffic class.
Enable Classification
Select or deselect the check box to enable or disable QoS classification.
SPECIFY TRAFFIC CLASSIFICATION RULES
Classification Type
Select
L1&L2
or
L3&L4
from the drop-down list.
L1&L2
maps to the features of layer 1 and layer 2, such as the MAC address.
L3&L4
maps to the features of layer 3 and layer 4, such as the IP address and the port.
Physical Lan Port
Select the physical port of the packet from the drop-down list. For example, ethernet1,
ethernet2, ethernet3, and ethernet4.
Source MAC Address
Enter the source MAC address of the packet.
Source MAC Mask
Use mask 000000ffffff to mask the MAC address. 00 indicates not mapped and ff
indicates mapped.
Destination MAC Address
Enter the destination MAC address of the packet.
Destination MAC Mask
Use mask 000000ffffff to mask the MAC address. 00 indicates not mapped and ff
indicates mapped
Ethernet Type
Select the layer 2 protocol type from the drop-down list. For example, IP protocol and
IPX protocol.
802.1p Priority
Select the 802.1p priority of the packet from the drop-down list. You can select
no match
or a value in the range of 0—7. Note that this function is not supported at the moment.
SPECIFIC TRAFFIC CLASSIFICATION RESULT
Assign Classification Queue
Specify the queue to which the packet belongs. You can set the queue in the classification
