38
3.3.5.2
Outbound IP Filtering
By default, all outgoing IP traffic from the LAN is allowed. The outbound filter allows you to create a filter rule to
block outgoing IP traffic by specifying a filter name and at least one criterion.
In the
FILTERING OPTIONS
page, click
Outbound IP Filtering
. The
OUTGOING IP FILTERING
page as
shown in the following figure appears:
Click
Add
to add an outbound IP filter. The page as shown in the following figure appears:
Enter the
Filter Name
and specify at least one of the following criteria: protocol, source/destination IP address,
subnet mask, and source/destination port. Click
Apply
to save the settings.
The
ACTIVE OUTBOUND FILTER
in the
OUTGOING IP FILTERING
page displays detailed information
OF each created outbound IP filter. Click
Delete
to delete an IP filter. Note that the
Delete
button appears only
when at least one IP filter exists.
