1.2.
Concrete or brickwork walls
INSTALLATION TECHNOLOGY
According to the Figure 2
1.
Make an opening in the wall with dimensions shown in the figure 2.
2.
In case of installing the fire damper with actuator set on different than first axis, the
opening intended for actuator should be
moved downwards respectively by
dimension N x 100, where N - the number of blade driven directly by the actuator.
3.
Put the fire damper into the installation opening in such way that the axis of the fire
damper matches the axis of the wall.
4.
After setting the fire damper, fill the gap between the fire damper and the wall with
cement mortar, lime mortar or concrete.
5.
Install the mounting frames on both sides of the wall with use of quick mounting
screws or anchors.
6.
Mount the masking grilles.
Summary of Contents for WKP
Page 1: ......
