page 3 z 6
Installation manual WKP type multi-blade fire damper
Version: 2.0.1
Remarks on WKP-T fire damper
Screw the last board (thick. 12.5 [mm] and a width of 300 [mm]), which covers the
lever system side, leading the screws along the length of the section at a distance
of no more than 25 [mm] from the clearance of the fire damper - (see Fig. 1). It is
prohibited to place the screws within 50 [mm] from the release of the locking
mechanism. In order to ensure the access to the electric drive mechanism, make an
additional opening in the flange made of plasterboards, with dimensions
of 140x320 [mm] from the appropriate side of the partition wall.
9.
Install the mounting frames on both sides of the wall and mount the masking grilles.
Summary of Contents for WKP
Page 1: ......
